Transcol Restoration Parget
Lime-based mortar developed for rough-coating old walls and ceilings or substrates and materials of different natures, leaving the substrate surface porous to improve adhesion of finishing mortars.
Substrate
Apply to vertical exterior and interior walls, such as stone, brick/adobe, and cob.
If the surface is exposed to intense sunlight, it should be lightly dampened 20 minutes before application or, in specific cases, a surface regulator can be applied.
Application Method
The mixture can be prepared manually, using a concrete mixer or spray machine.
Mix the contents of the 25 Kg bag with approximately 3 to 4 liters of clean water, free from impurities, until a homogeneous mixture is obtained.
Once mixed, the mortar should be applied within the next 30 minutes, without adding more water after mixing.
Apply by spreading the mortar evenly, covering the entire wall or ceiling in a uniform layer, with a minimum thickness of 4 mm.
After application, wait 24 hours before applying the finishing mortar.
The Transcol Restoration Parget does not replace painting.
Safety
It is recommended to use a dust mask to protect the respirable crystalline silica, goggles and gloves when handling the product. If there is contact with eyes, rinse thoroughly with clean water. Do not ingest.
Technical Information
📋 Technical Information
Where to buy
Find the closest reseller to you!
Related Products
Discover our range of Rehabilitation Mortars
Do you have any questions?
