Transcol LH08 (Laying Tiles)
Dry, water-repellent mortar, used for installing ceramic tiles, roof tiles, and other interlocking pieces.
Substrate
Apply to all types of ceramic tiles.
The substrate and tiles must be clean and free of dust, grease and oil.
The substrate must not be too dry; if it is, lightly dampen the surface 20 minutes before application.
Application Method
Spread the mortar evenly in a uniform layer and, when laying the pieces, tap them until the mortar flows back. This excess must be removed and the pieces cleaned as they are laid.
Safety
It is recommended to use a dust mask to protect the respirable crystalline silica, goggles and gloves when handling the product. If there is contact with eyes, rinse thoroughly with clean water. Do not ingest.
Technical Information
📋 Technical Data Sheet
Where to buy
Find the closest reseller to you!
Discover our range of Technical Mortars
Do you have any questions?
