Transcol Masonry MT M5
Hydrophobic dry general-purpose masonry mortar designed for common masonry tasks such as wall leveling, brick/block joints, or similar applications.
Substrate
Designed for laying ceramic bricks, exposed bricks, and cement blocks.
The masonry element must be properly cleaned.
Dampen the surface so that it is neither too dry nor too wet.
Application Method
The mixture can be prepared manually, using a concrete mixer or a mixing machine.
Mix the contents of the 25 kg bag with approximately 3.25 to 3.5 liters of clean water until a homogeneous mixture without lumps is obtained.
Once mixed, the mortar must be applied within the next hour, without adding more water.
After application, the surface should be leveled.
The curing time for Transcol Masonry MT M5 is 28 days.
Safety
It is recommended to use a dust mask to protect the respirable crystalline silica, goggles and gloves when handling the product. If there is contact with eyes, rinse thoroughly with clean water. Do not ingest.
Technical Information
📋 Technical Data Sheet
Where to buy
Find the closest reseller to you!
Discover our range of Technical Mortars
Do you have any questions?
