Transcol N-Level
Self-leveling technical mortar used for interior floor leveling, filling, and surface leveling of concrete and mortar where a thin layer is required.
Substrate
Apply on concrete, cement terraces, ceramic and stone coatings, screeds, vinyl coatings, and marine plywood.
The support should be free of active cracks or efflorescence.
If the support is too dry, it should be lightly moistened 20 minutes before application.
Application Method
The mixture should be made with a mixer at 650 rpm.
Mix the contents of the 25 Kg bag with approximately 8 liters of clean water for 2 to 3 minutes until a homogeneous mass is obtained, free of lumps. After mixing, the mortar should be applied within 10 minutes.
Apply in a uniform layer by pouring, covering the entire floor with the help of a trowel or spatula.
After application, the surface should be leveled with a spiked roller to release air bubbles. Wait 4 hours before the surface can be used for traffic.
The floor should always be covered or painted with light colors.
Safety
It is recommended to use a dust mask to protect the respirable crystalline silica, goggles and gloves when handling the product. If there is contact with eyes, rinse thoroughly with clean water. Do not ingest.
Technical Information
📋 Technical Data Sheet
Where to buy
Find the closest reseller to you!
Related Products
Discover our range of Technical Mortars
Do you have any questions?
